Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...
Other information:
Description
TCM stores calibration data (inherent characteristic value) of G sensor to provide accurate control. Therefore, it is required to perform calibration of decel G sensor after the following work is performed.
Removal/installation or replacement of ABS actuator and electric unit (control unit)
Replacement of TCM
Erasing the calibration data of TCM
Refer to Work Procedure...
Description
Always perform the memory storage when the battery terminal is disconnected or the driver seat control unit is replaced. The memory function will not operate normally if no memory storage is performed.
Work Procedure
Memory Storage ProcedureTwo positions for the driver seat, steering column and outside mirror can be stored for memory operation by the following procedure:STEP 1
Check the following conditions:
Ignition switch: ON
CVT shift selector: P (Park) position
>>
GO TO 2...