Nissan Murano: Driver Information & Multimedia / Meter, Warning Lamp & Indicator :: Preparation. Preparation

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Information & Multimedia / Meter, Warning Lamp & Indicator :: Preparation. Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number

(TechMate No.)

Tool name
  Description

  —

(J-46534)

Trim Tool Set

Removing trim components
Commercial Service Tools

(TechMate No.)

Tool name
  Description

( — )

Power tool

Loosening nuts, screws and bolts

    Meter, Warning Lamp & Indicator :: Precaution. Precautions

    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

    Meter, Warning Lamp & Indicator :: System Description

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: Rear bench seat adjustment


    Reclining Pull the reclining strap and position the seatback at the desired angle. Release the reclining strap after positioning the seat at the desired angle. The reclining feature allows adjustment of the seatback for occupants of different sizes to help obtain proper seat belt fit...

    Nissan Murano (Z52) 2015-2024 Service Manual: Low Tire Pressure Warning Lamp Does Not Turn on


    Diagnosis Procedure NOTE: The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the TPMS sensor Read TPMS DTCs Register TPMS sensor IDs PERFORM SELF DIAGNOSTIC RESULT CONSULT Ignition switch ON...

    Categories

    Fuel gauge

    Nissan Murano. Fuel gauge

    The gauge indicates the approximate fuel level in the tank.

    The gauge may move slightly during braking, turning, acceleration, or going up or down hills.

    The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position.

    read more

     
    Copyright © 2026 www.nimurano.com