Nissan Murano: Audio, Visual & Navigation System :: Intelligent Around View Monitor with Navigation System / Symptom Diagnosis. Intelligent Around View Monitor System
INTELLIGENT AROUND VIEW MONITOR SYSTEM
NOTE:
Inspect the vehicle for a front license plate frame or cover. If there is a front license plate frame or cover, the front camera will see it and show it on the monitor.
| Symptom | Check items | Probable malfunction location | |
|---|---|---|---|
| Screen is not switched to camera image when CAMERA button is pressed or when shift position is shifted to “R”. | “AVM” is not displayed on the system selection screen of CONSULT. | Around view monitor control unit power supply or ground circuit. Refer to Diagnosis Procedure. | |
|
Check that Data Monitor item values are normal using CONSULT:
|
CAMERA SWITCH SIGNAL and REVERSE SIGNAL are normal. | Around view monitor control unit. Refer to Removal and Installation. | |
| CAMERA SWITCH SIGNAL is not normal. | CAN communication circuit. Refer to Trouble Diagnosis Flow Chart. | ||
| REVERSE SIGNAL is not normal. | Reverse signal circuit. Refer to Reference Value. | ||
|
Check the following Data Monitor item using CONSULT:
|
F-CAMERA IMAGE SIGNAL: NG |
Front camera power supply circuit and image signal circuit. Refer to Diagnosis Procedure. |
|
Check the following Data Monitor item using CONSULT:
|
REAR CAMERA IMAGE SIGNAL: NG |
Rear camera power supply circuit and image signal circuit. Refer to Diagnosis Procedure. |
| LH side of birds-eye view is not displayed. |
Check the following Data Monitor item using CONSULT:
|
DR-SIDE CAMERA IMAGE SIGNAL: NG |
Side camera LH power supply circuit and image signal circuit. Refer to Diagnosis Procedure. |
| RH side of birds-eye view is not displayed. |
Check the following Data Monitor item using CONSULT:
|
PA-SIDE CAMERA IMAGE SIGNAL: NG | Side camera RH power supply circuit and image signal circuit. Refer to Diagnosis Procedure. |
Power Supply and Ground Circuit
Diagnosis Procedure
CHECK FUSE
Check that the following fuses are not blown:
Terminal No. Signal name Fuse No. Capacity
40
Ignition signal
29
10 A
Are the fuses blown?
YES>>
Replace the blown fuse after repairing the affected circuit...
Other information:
Nissan Murano (Z52) 2015-2024 Owners Manual: LED Daytime Running Lights (DRL) system
The LED portion of the headlights automatically illuminate at 100% intensity when the engine is started with the parking brake released. The LED DRL operate with the headlight switch in the OFF position or in the position. Turn the headlight switch to the position for full illumination when driving at night...
Nissan Murano (Z52) 2015-2024 Service Manual: Rcta
System Description SYSTEM DIAGRAMADAS CONTROL UNIT INPUT/OUTPUT SIGNAL ITEMInput Signal Item Transmit unit Signal name Description TCM CAN communication Current gear position signal Receives a current gear position. Shift position signal Receives a select lever position...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- How to enable/disable the LDW system
- Rear bench seat adjustment
- Indicator lights
- New on site
- Most important about car
Vehicle security system
Your vehicle has two types of security systems:
Vehicle security system NISSAN Vehicle Immobilizer SystemThe vehicle security system provides visual and audible alarm signals if someone opens the doors, liftgate or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.
