Nissan Murano: Meter, Warning Lamp & Indicator :: Ecu Diagnosis Information / Bcm (body Control Module)

Combination Meter

Values on the Diagnosis Tool NOTE: The following table includes information (items) inapplicable to this Nissan Murano vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items...

Meter, Warning Lamp & Indicator :: Basic Inspection. Diagnosis and Repair Work Flow

Work flow OVERALL SEQUENCE Reference 1: On Board Diagnosis Function. Reference 2: DTC Index. Reference 3: Diagnosis Procedure. Reference 4: Component Inspection...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0181 Ftt Sensor

DTC Description DTC DETECTION LOGIC Rationally incorrect voltage from the sensor is sent to ECM, compared with the voltage signals from ECT sensor and intake air temperature sensor. The comparison result of signals transmitted to ECM from each temperature sensor (IAT sensor, ECT sensor, EOT sensor, and FTT sensor) shows that the voltage signal of the FTT sensor is higher/lower than that of other temperature sensors when the engine is started with its cold state...

Nissan Murano (Z52) 2015-2024 Service Manual: C1a03 Vehicle Speed Sensor

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C1A03–64 VHCL SPEED SE CIRC (Nissan Murano Vehicle speed sensor circuit) Diagnosis condition When ignition switch in ON. Signal (terminal) — Threshold If the Nissan Murano vehicle speed signal (wheel speed) from ABS actuator and electric unit (control unit) and the CVT vehicle speed sensor signal (output shaft revolution signal) from TCM, received by the distance sensor (ICC sensor) via CAN communication, are inconsistent If tire size is not correct Diagnosis delay time — POSSIBLE CAUSE Wheel speed sensor ABS actuator and electric unit (control unit) Nissan Murano Vehicle speed sensor CVT (output speed sensor) TCM Distance sensor (ICC sensor) Tire FAIL-SAFEThe following systems are canceled: Intelligent Cruise Control (ICC) Automatic Emergency Braking (AEB) Intelligent Forward Collision Warning (I-FCW) Blind Spot Warning (BSW) DTC Confirmation Procedure CHECK DTC PRIORITY If DTC “C1A03–64” is displayed with DTC “U1000–01” or “C1A04–97”, first diagnose the DTC “U1000–01” or “C1A04–97”...