Other information:
Exploded View
1.
Door mirror corner finisher
2.
Blind spot warning indicator
Clip
Removal and Installation
REMOVALRemove the front door finisher. Refer to Removal and Installation.
Remove the door mirror corner finisher.
Disconnect harness connector from blind spot warning indicator...
DTC Description
DTC DETECTION LOGIC
ECM detects that the voltage of power source for throttle control motor is excessively low.
ECM detects that the throttle control motor relay is stuck ON.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P2100
ETC MOT PWR-B1
(Throttle actuator “A” control motor circuit/open)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
Throttle control motor circuit
Threshold
ECM detects that the voltage of power source for throttle control motor is excessively low
Diagnosis delay time
—
P2103
ETC MOT PWR-B1
(Throttle actuator “A” control motor circuit high)
Diagnosis condition
Ignition switch ON
Signal (terminal)
Throttle control motor circuit
Threshold
ECM detects that the throttle control motor relay is stuck ON
Diagnosis delay time
—
POSSIBLE CAUSEDTC P2100
Harness or connectors
(Throttle control motor relay circuit is open)
Throttle control motor relay
DTC P2103
Harness or connectors
(Throttle control motor relay circuit is shorted)
Throttle control motor relay
FAIL-SAFE Engine operating condition in fail-safe mode
Fail safe mode Nissan Murano Vehicle behavior
Throttle control motor relay
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx...