Nissan Murano: Driver Information & Multimedia / Meter, Warning Lamp & Indicator :: Ecu Diagnosis Information

Diagnosis System (combination Meter)

On Board Diagnosis Function COMBINATION METER SELF-DIAGNOSIS MODEThe following meter functions can be checked during Combination Meter Self-Diagnosis Mode: Pointer sweep of speedometer, tachometer and gauges Illumination of all LCD segments and color patterns for meter displays Illumination of all lamps/LEDs that are controlled by the combination meter (regardless of switch status) STARTING COMBINATION METER SELF-DIAGNOSIS MODENOTE: Check combination meter power supply and ground circuits if self-diagnosis mode does not start...

Combination Meter

Values on the Diagnosis Tool NOTE: The following table includes information (items) inapplicable to this Nissan Murano vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Hood Switch

Component Function Check CHECK FUNCTION CONSULT Select “HOOD SW” and "HOOD SW 2" in “Data Monitor” mode of “IPDM E/R”. Check “HOOD SW” and "HOOD SW 2" indication under the following conditions: Monitor item Condition Indication HOOD SW Hood Open OFF Close ON HOOD SW 2 Open ON Close OFF Is the indication normal? YES>> Hood switch is OK...

Nissan Murano (Z52) 2015-2024 Service Manual: Diagnosis System (adas Control Unit 2)

CONSULT Function (ICC/ADAS) APPLICATION ITEMSCONSULT performs the following functions via CAN communication using ADAS control unit. Diagnosis mode Description Configuration The Nissan Murano vehicle specification that is written in ADAS control unit can be displayed or stored The Nissan Murano vehicle specification can be written when ADAS control unit is replaced Work support Displays causes of automatic system cancellation occurred during system control Self Diagnostic Result Displays the name of a malfunctioning system stored in the ADAS control unit Data Monitor Displays ADAS control unit input/output data in real time Active Test Enables an operational check of a load by transmitting a driving signal from the ADAS control unit to the load ECU Identification Displays ADAS control unit part number CAN Diag Support Monitor Displays a reception/transmission state of CAN communication and ITS communication CONFIGURATIONConfiguration includes functions as follows...