Other information:
DTC Description
DTC DETECTION LOGICRationally incorrect voltage is sent to ECM compared with the signals from TP sensor 1 and TP sensor 2. DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P2135
TP SENSOR-B1
(Throttle/Pedal position sensor/switch “A” / “B” voltage correlation)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
TP sensor 1 signal and TP sensor 2 signal
Threshold
Rationally incorrect voltage is sent to ECM compared with the signals from TP sensor 1 and TP sensor 2
Diagnosis delay time
—
POSSIBLE CAUSE
Harness or connector
(TP sensor 1 or 2 circuit is open or shorted...
Inspection
INSPECTION PROCEDURE
Connect recovery/recycling/recharging equipment (for HFO-1234yf) or manifold gauge.
Start the engine, and set to the following conditions.
Test condition Surrounding condition Indoors or in the shade (in a well-ventilated place)
Nissan Murano Vehicle condition
Door
Closed
Door glass
Full open
Hood
Open
Engine speed
Idle speed
A/C condition
Temperature control switch or dial
Full cold
A/C switch
ON
Air outlet
VENT (ventilation)
Intake door position
Recirculation
Fan (blower) speed
Maximum speed set
Maintain test condition until A/C system becomes stable (approximately 10 minutes)...