Nissan Murano: Meter, Warning Lamp & Indicator :: Ecu Diagnosis Information / Combination Meter

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Information & Multimedia / Meter, Warning Lamp & Indicator :: Ecu Diagnosis Information / Combination Meter

Values on the Diagnosis Tool

NOTE:

The following table includes information (items) inapplicable to this Nissan Murano vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item	Condition		Value/Status
SPEED METER [mph or km/h]	Ignition switch ON	While driving.	Input value of Nissan Murano vehicle speed signal (CAN communication signal).
SPEED OUTPUT [mph or km/h]	Ignition switch ON	While driving.	Output value of Nissan Murano vehicle speed signal (CAN communication signal).
ODO OUTPUT [mph or km/h]	Ignition switch ON	—	Output value of odometer signal (CAN communication signal).
TACHO METER [rpm]	Ignition switch ON	Engine running.	Input value of engine speed signal (CAN communication signal).
FUEL METER [L]	Ignition switch ON	—	Input value of fuel level sensor signal.
W TEMP METER [°F] or [°C]	Ignition switch ON	—	Input value of engine coolant temperature signal (CAN communication signal).
ABS W/L	Ignition switch ON	ABS warning lamp ON.	On
ABS W/L	Ignition switch ON	ABS warning lamp OFF.	Off
VDC/TCS IND	Ignition switch ON	VDC OFF indicator lamp ON.	On
VDC/TCS IND	Ignition switch ON	VDC OFF indicator lamp OFF.	Off
SLIP IND	Ignition switch ON	VDC warning lamp ON.	On
SLIP IND	Ignition switch ON	VDC warning lamp OFF.	Off
BRAKE W/L	Ignition switch ON	Brake warning lamp ON.	On^*1
BRAKE W/L	Ignition switch ON	Brake warning lamp OFF.	Off
DOOR W/L	Ignition switch ON	Door open warning ON.	On
DOOR W/L	Ignition switch ON	Other than the above	Off
TRUNK/GLAS-H	Ignition switch ON	Back door open warning ON	On
TRUNK/GLAS-H	Ignition switch ON	Other than the above	Off
HI-BEAM IND	Ignition switch ON	High beam indicator lamp ON.	On
HI-BEAM IND	Ignition switch ON	High beam indicator lamp OFF.	Off
TURN IND	Ignition switch ON	Turn signal indicator lamp ON.	On
TURN IND	Ignition switch ON	Turn signal indicator lamp OFF.	Off
FR FOG IND	Ignition switch ON	Front fog lamp indicator lamp ON.	On
FR FOG IND	Ignition switch ON	Front fog lamp indicator lamp OFF.	Off
LIGHT IND	Ignition switch ON	Position lamp indicator lamp ON.	On
LIGHT IND	Ignition switch ON	Position lamp indicator lamp OFF.	Off
OIL W/L	Ignition switch ON	Engine oil pressure warning displayed.	On
OIL W/L	Ignition switch ON	Other than the above.	Off
MIL	Ignition switch ON	Malfunction indicator lamp ON.	On
MIL	Ignition switch ON	Malfunction indicator lamp OFF.	Off
BA W/L	Ignition switch ON	AEB warning lamp ON	On
BA W/L	Ignition switch ON	AEB warning lamp OFF	Off
ATC/T-AMT W/L	Ignition switch ON	A/T CHECK warning indication	On
ATC/T-AMT W/L	Ignition switch ON	Other than the above	Off
4WD W/L	Ignition switch ON	AWD warning displayed.	On
4WD W/L	Ignition switch ON	Other than the above.	Off
FUEL W/L	Ignition switch ON	Low fuel warning displayed.	On
FUEL W/L	Ignition switch ON	Low fuel warning lamp OFF.	Off
WASHER W/L	Ignition switch ON	Low washer fluid warning displayed.	On
WASHER W/L	Ignition switch ON	Other than the above.	Off
AIR PRES W/L	Ignition switch ON	Low tire pressure warning lamp ON.	On
AIR PRES W/L	Ignition switch ON	Low tire pressure warning lamp OFF.	Off
KEY G/Y W/L	Ignition switch ON	Intelligent Key system warning indication.	On
KEY G/Y W/L	Ignition switch ON	Other than the above.	Off
EPS W/L	Ignition switch ON	Power steering warning lamp ON.	On
EPS W/L	Ignition switch ON	Power steering warning lamp OFF.	Off
ACC TARGET	Ignition switch ON	During Nissan Murano vehicle ahead detection indication.	On
ACC TARGET	Ignition switch ON	Other than the above	Off
ACC DISTANCE	Ignition switch ON	When following distance is set to “LONG”	LONG
		When following distance is set to “MIDDLE”	MID
		When following distance is set to “SHORT”	SHORT
		Set distance indicator not displayed	Off
SHIFT IND	Ignition switch ON	Shift position indicator displayed.	[P, R, N, D]
FUEL CAP W/L	Ignition switch ON	Fuel filler cap warning displayed.	On
FUEL CAP W/L	Ignition switch ON	Other than the above.	Off
M RANGE SW	Ignition switch ON	Shift selector in manual mode position	On
M RANGE SW	Ignition switch ON	Other than the above	Off
NM RANGE SW	Ignition switch ON	Shift selector in manual mode position	Off
NM RANGE SW	Ignition switch ON	Other than the above	On
AT SFT UP SW	Ignition switch ON	Shift selector operated in the up position	On
AT SFT UP SW	Ignition switch ON	Other than the above	Off
AT SFT DWN SW	Ignition switch ON	Shift selector operated in the down position	On
AT SFT DWN SW	Ignition switch ON	Other than the above	Off
PKB SW	Ignition switch ON	Parking brake switch ON.	On
PKB SW	Ignition switch ON	Parking brake switch OFF.	Off
BUCKLE SW	Ignition switch ON	Driver seat belt not fastened.	On
BUCKLE SW	Ignition switch ON	Driver seat belt fastened.	Off
BRAKE OIL SW	Ignition switch ON	Brake fluid level switch ON.	On
BRAKE OIL SW	Ignition switch ON	Brake fluid level switch OFF.	Off
DISTANCE [mi] or [km]	Ignition switch ON	—	Distance to empty.
OUTSIDE TEMP [°F] or [°C]	Ignition switch ON	—	Displays the ambient air temperature which is input from the ambient sensor.
FUEL LOW SIG	—	Low fuel level warning.	On
FUEL LOW SIG	—	Except during low fuel level warning.	Off
BUZZER	Ignition switch ON	Buzzer ON.	On
BUZZER	Ignition switch ON	Buzzer OFF.	Off
LCD	Ignition switch ON	Engine start information.	B&P
STRG SW INPUT	Ignition switch ON	BACK switch is pressed.	SW1
		MENU UP switch is pressed.	SW2
		MENU DOWN switch is pressed.	SW3
		Voice recognition switch is pressed.	SW4
		MENU OK switch is pressed.	SW5
		VOL DOWN switch is pressed.	SW6
		VOL UP switch is pressed.	SW7
		TEL switch is pressed.	SW8
		Display back switch is pressed.	SW9
		Display next switch is pressed.	SW10
		Other than the above.	NO INPUT
SONAR DET STATUS	Ignition switch ON	—	Displays condition of sonar detection area.
SONAR WARN	Ignition switch ON	—	Displays condition of sonar warning.
SONAR DET DSP RC	Ignition switch ON	—	Displays condition of RC sonar detection display.
SONAR DET DSP AREA RC	Ignition switch ON	—	Displays condition of RC sonar detection area image.
SONAR DET DSP RL	Ignition switch ON	—	Displays condition of RL sonar detection display.
SONAR DET DSP AREA RL	Ignition switch ON	—	Displays condition of RL sonar detection area image.
SONAR DET DSP RR	Ignition switch ON	—	Displays condition of RR sonar detection display.
SONAR DET DSP AREA RR	Ignition switch ON	—	Displays condition of RR sonar detection area image.
SONAR DET DSP FC	Ignition switch ON	—	Displays condition of FC sonar detection display.
SONAR DET DSP AREA FC	Ignition switch ON	—	Displays condition of FC sonar detection area image.
SONAR DET DSP FL	Ignition switch ON	—	Displays condition of FL sonar detection display.
SONAR DET DSP AREA FL	Ignition switch ON	—	Displays condition of FL sonar detection area image.
SONAR DET DSP FR	Ignition switch ON	—	Displays condition of FR sonar detection display.
SONAR DET DSP AREA FR	Ignition switch ON	—	Displays condition of FR sonar detection area image.
SONAR DIST DSP	Ignition switch ON	—	Displays sonar distance status.
TPMS PRESS L	Ignition switch ON	Tire pressure is low.	On
TPMS PRESS L	Ignition switch ON	Tire pressure is normal.	Off
4WD CL TMP H	Ignition switch ON	AWD warning (AWD high temp) ON	On
4WD CL TMP H	Ignition switch ON	AWD warning (AWD high temp) OFF	Off
4WD TIRE CHCK	Ignition switch ON	AWD warning (tire size incorrect) ON	On
4WD TIRE CHCK	Ignition switch ON	AWD warning (tire size incorrect) OFF	Off
4WD SYS MALF	Ignition switch ON	AWD warning (AWD error) ON	On
4WD SYS MALF	Ignition switch ON	AWD warning (AWD error) OFF	Off
ASCD SPD BLNK	Ignition switch ON	Set Nissan Murano vehicle speed indicator blinking	On
ASCD SPD BLNK	Ignition switch ON	Set Nissan Murano vehicle speed indicator not blinking	Off
ASCD STATUS	Ignition switch ON	ASCD system OFF	Off
		ASCD system ON	ASCD
		ASCD set Nissan Murano vehicle speed	CRUISE
ASCD REQ SPD	Ignition switch ON	While driving	Same value as ASCD or speed limiter set Nissan Murano vehicle speed.
TPMS DISP	Ignition switch ON	When following tire pressure set to "HIGH"	HIGH
		When following tire pressure set to "MIDDLE"	MEDIUM
		When following tire pressure set to "LOW"	LOW
		Other than above	Not support
TIRE STATUS FR	Ignition switch ON	Low tire pressure warning (front RH) ON	On
TIRE STATUS FR	Ignition switch ON	Low tire pressure warning (front RH) OFF	Off
TIRE STATUS FL	Ignition switch ON	Low tire pressure warning (front LH) ON	On
TIRE STATUS FL	Ignition switch ON	Low tire pressure warning (front LH) OFF	Off
TIRE STATUS RR	Ignition switch ON	Low tire pressure warning (rear RH) ON	On
TIRE STATUS RR	Ignition switch ON	Low tire pressure warning (rear RH) OFF	Off
TIRE STATUS RL	Ignition switch ON	Low tire pressure warning (rear LH) ON	On
TIRE STATUS RL	Ignition switch ON	Low tire pressure warning (rear LH) OFF	Off
LDW IND	Ignition switch ON	LDW system display ON	On
LDW IND	Ignition switch ON	LDW system display OFF	Off
SET LDW	Ignition switch ON	LDW status is ON	On
		LDW status is OFF	Off
		Other than the above	Not supported
SET BSW	Ignition switch ON	BSW status is ON	On
		BSW status is OFF	Off
		Other than the above	Not supported
TIRE PRESS FR	Ignition switch ON	State of the tire air pressure (FR)	kPa, kg/cm² or Psi
TIRE PRESS FL	Ignition switch ON	State of the tire air pressure (FL)	kPa, kg/cm² or Psi
TIRE PRESS RR	Ignition switch ON	State of the tire air pressure (RR)	kPa, kg/cm² or Psi
TIRE PRESS RL	Ignition switch ON	State of the tire air pressure (RL)	kPa, kg/cm² or Psi
BSW IND	Ignition switch ON	Blind spot warning indicator ON	On
BSW IND	Ignition switch ON	Blind spot warning indicator OFF	Off
LDP IND	Ignition switch ON	I-LI ON indicator ON.	On
LDP IND	Ignition switch ON	I-LI ON indicator OFF.	Off
HI-BEAM ASST IND	Ignition switch ON	High beam assist indicator lamp ON	On
HI-BEAM ASST IND	Ignition switch ON	High beam assist indicator lamp OFF	Off

*1: Displays “Off” if the brake warning lamp is illuminated when the valve check starts, the parking brake switch is turned ON or the brake fluid level switch is turned ON.

Reference Value

TERMINAL LAYOUT

PHYSICAL VALUES

Terminal No. (Wire color)		Description		Condition		Value (Approx.)
+	–	Signal name	Input/ Output	Condition		Value (Approx.)
7 (V)	Ground	Security signal	Input	Ignition switch OFF	Security indicator ON.	0 V
7 (V)	Ground	Security signal	Input	Ignition switch OFF	Security indicator OFF.	Battery voltage
10 (B)	Ground	Ground	—	—	—	0 V
11 (BG)	Ground	Generator signal	—	Ignition switch ON	Charge warning lamp ON	2 V
11 (BG)	Ground	Generator signal	—	Ignition switch ON	Charge warning lamp OFF	Battery voltage
12 (Y)	Ground	LED headlamp RH warning signal	Input	Ignition switch ON	Headlamp ON	.16 V
12 (Y)	Ground	LED headlamp RH warning signal	Input	Ignition switch ON	Headlamp OFF	10.5 V
13 (GR)	Ground	LED headlamp LH warning signal	Input	Ignition switch ON	Headlamp ON	.16 V
13 (GR)	Ground	LED headlamp LH warning signal	Input	Ignition switch ON	Headlamp OFF	10.5 V
14 (P)	Ground	ACC power supply	—	Ignition switch ACC	—	Battery voltage
17 (G)	Ground	Meter control switch ground	—	—	—	0 V
18 (LG)	Ground	Trip/reset switch signal	Input	Ignition switch OFF or ON	Trip/Reset switch is pressed.	0 V
18 (LG)	Ground	Trip/reset switch signal	Input	Ignition switch OFF or ON	Other than the above.	5.0 V
21 (R)	Ground	Steering switch ground	—	—	—	0 V
22 (P)	Ground	Steering switch input 1	—	—	—	—
23 (BG)	Ground	Steering switch input 2	—	—	—	—
24 (P)	Ground	Washer fluid level switch signal	Input	Ignition switch ON	Washer fluid level switch ON.	0 V
24 (P)	Ground	Washer fluid level switch signal	Input	Ignition switch ON	Washer fluid level switch OFF.	Battery voltage
25 (G)	Ground	Brake fluid level switch signal	Input	Ignition switch ON	Brake fluid level low.	0 V
25 (G)	Ground	Brake fluid level switch signal	Input	Ignition switch ON	Brake fluid level normal.	Battery voltage
26 (BR)	Ground	Parking brake switch signal	Input	Ignition switch ON	Parking brake applied.	0 V
26 (BR)	Ground	Parking brake switch signal	Input	Ignition switch ON	Parking brake released.	Battery voltage
27 (BR)	Ground	Front seat belt buckle switch RH signal	Input	Ignition switch ON	When passenger seat belt is fastened.	—
27 (BR)	Ground	Front seat belt buckle switch RH signal	Input	Ignition switch ON	When passenger seat belt is unfastened.	—
28 (Y)	Ground	Front seat belt buckle switch LH signal	Input	Ignition switch ON	When driver seat belt is fastened.	Battery voltage
28 (Y)	Ground	Front seat belt buckle switch LH signal	Input	Ignition switch ON	When driver seat belt is unfastened.	0 V
30 (V)	Ground	Manual mode signal	Input	Ignition switch ON	Selector lever manual mode position	0 V
30 (V)	Ground	Manual mode signal	Input	Ignition switch ON	Other than the above	Battery voltage
31 (P)	Ground	Non-manual mode signal	Input	Ignition switch ON	Selector lever manual mode position	Battery voltage
31 (P)	Ground	Non-manual mode signal	Input	Ignition switch ON	Other than the above	0 V
32 (BG)	Ground	Manual mode shift up signal	Input	Ignition switch ON	Selector lever UP operation	0 V
32 (BG)	Ground	Manual mode shift up signal	Input	Ignition switch ON	Other than the above	Battery voltage
33 (W)	Ground	Manual mode shift down signal	Input	Ignition switch ON	Selector lever DOWN operation	0 V
33 (W)	Ground	Manual mode shift down signal	Input	Ignition switch ON	Other than the above	Battery voltage
36 (BR)	Ground	Illumination control switch signal (+)	Input	Ignition switch OFF or ON	When illumination control switch (+) is pressed.	0 V
36 (BR)	Ground	Illumination control switch signal (+)	Input	Ignition switch OFF or ON	Other than the above.	5.0 V
37 (Y)	Ground	Illumination control switch signal (-)	Input	Ignition switch OFF or ON	When illumination control switch (-) is pressed.	0 V
37 (Y)	Ground	Illumination control switch signal (-)	Input	Ignition switch OFF or ON	Other than the above.	5.0 V
38 (BR)	Ground	Nissan Murano Vehicle speed signal (8-pulse)	Output	Ignition switch ON	Speedometer operated [When Nissan Murano vehicle speed is approx. 25 MPH (40 km/h)].	NOTE: The maximum voltage varies depending on the specification (destination unit).
42 (B)	Ground	Illumination control signal	Output	Ignition switch ON	Lighting switch 1st position When meter illumination is minimum.
					Lighting switch 1st position When meter illumination is step 11.
					Lighting switch 1st position When meter illumination is maximum.	0 V
43 (B)	Ground	Ground	—	—	—	0 V
44 (BG)	Ground	Ignition signal	—	Ignition switch ON or START	—	Battery voltage
45 (B)	Ground	Ground	—	—	—	0 V
46 (W)	Ground	Battery power supply	—	—	—	Battery voltage
47 (R)	Ground	Welcome lighting illumination control	—	—	—	—
48 (W)	Ground	Fuel level sensor signal	—	Ignition switch ON	Fuel gauge indication position.	Battery voltage
49 (LG)	Ground	M CAN-Low	—	—	—	—
50 (SB)	Ground	M CAN-High	—	—	—	—
52 (P)	Ground	CAN-Low	—	—	—	—
53 (L)	Ground	CAN-High	—	—	—	—
54 (R)	Ground	Fuel level sensor ground	—	Ignition switch ON	—	0 V

Fail-safe

The combination meter activates the fail-safe control if the CAN communication lines between each unit are malfunctioning.

Function		Specifications
Speedometer		Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge
Meter illumination control		When suspending communication, it changes to nighttime mode.
Buzzer		Turns OFF by suspending communication.
Information display	Current fuel consumption	The last result calculated during normal condition is indicated.
	Average fuel consumption
	Average Nissan Murano vehicle speed
	Range (Distance to empty)
	Driving distance
	Door open warning	The display turns OFF by suspending communication.
	Back door open warning
	Low tire pressure warning
	Parking brake release warning
	Fuel-filler cap warning
	Oil pressure warning
	AWD warning lamp
	BSW warning
	Odo/trip meter	An indicated value is maintained at communications blackout.
	Shift position indicator	The indicator turns OFF by suspending communication.
Warning lamp/indicator lamp	ABS warning lamp	Turns ON by suspending communication.
	Brake warning lamp
	Power steering warning lamp
	VDC warning lamp
	AEB warning lamp
	RAB warning lamp
	Malfunction indicator lamp
	Air bag warning lamp
	Charge warning lamp
	VDC OFF indicator lamp	Turns OFF by suspending communication.
	High beam indicator lamp
	Turn signal indicator lamp
	Position lamp indicator lamp
	Front fog lamp indicator lamp (if equipped)
	High beam assist indicator lamp
	Low tire pressure warning lamp	After blinking for 1 minute, the lamp remains ON.

DTC Index

Display contents of CONSULT	Diagnostic item is detected when...	Refer to
CAN COMM CIRCUIT [U1000]	Combination meter is not transmitting or receiving CAN communication signal for 2 seconds or more.	DTC Description
CONTROL UNIT (CAN) [U1010]	Detecting error during the initial diagnosis of CAN controller of combination meter.	DTC Description
Nissan Murano Vehicle SPEED CIRC [B2205]	The abnormal vehicle speed signal is input from ABS actuator and electric unit (control unit) for 2 seconds or more.	DTC Description
ENGINE SPEED [B2267]	ECM continuously transmits abnormal engine speed signals for 2 seconds or more.	DTC Description
WATER TEMP [B2268]	ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more.	DTC Description

Meter, Warning Lamp & Indicator :: Ecu Diagnosis Information

Bcm (body Control Module)

L..

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Nissan Murano (Z52) 2015-2024 Service Manual: U0415 Vehicle Speed

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition U0415 Nissan Murano Vehicle SPEED (Vehicle speed signal) Diagnosis condition When ignition switch ON. Signal (terminal) — Threshold — Diagnosis delay time 2 seconds or more POSSIBLE CAUSE ABS actuator and electric unit (control unit) BCM FAIL-SAFE— DTC Confirmation Procedure DTC CONFIRMATION PROCEDURE CONSULT Erase the DTC...