Nissan Murano: Meter, Warning Lamp & Indicator :: Symptom Diagnosis / The Steering Switches Are Inoperative
One or more of the steering switches to control the information display are inoperative.
CHECK STEERING SWITCH CIRCUIT
Check steering switch circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace harness or connector.
CHECK STEERING SWITCH RESISTANCE
Check steering switch resistance. Refer to Component Inspection.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace steering switch. Refer to Removal and Installation.
CHECK SPIRAL CABLE
Check spiral cable for continuity. Refer to Component Inspection.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Replace spiral cable. Refer to Removal and Installation.
The Door Open Warning Continues Displaying, or Does Not Display
Diagnosis Procedure
The door open warning is displayed even though all of the doors are closed.
The door open warning is not displayed even though a door is ajar...
The Ambient Temperature Display Is Incorrect
Diagnosis Procedure
The displayed outside air temperature is higher than the actual temperature.
The displayed outside air temperature is lower than the actual temperature...
Other information:
Nissan Murano (Z52) 2015-2024 Owners Manual: Operating vehicle-to-vehicle distance control mode
To turn on the cruise control, quickly push and release the CRUISE ON/OFF switch . The ICC system ON indicator (gray), set distance indicator and set vehicle speed indicator come on in a standby state for setting. If the Cruise Control Alerts are enabled in the Driver Assistance menu, then the “Cruise ON: Press SET to engage speed and distance control” message will appear in the vehicle information display...
Nissan Murano (Z52) 2015-2024 Service Manual: C1a4a-82 Tcm Can Circuit1
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detection condition C1A4A-82 TCM CAN CIRC1 (TCM CAN circuit1) Diagnosis condition When engine is running When MAIN switch of ICC system is ON Signal (terminal) CAN communication signal Threshold If ADAS control unit detects an error signal that is received from TCM via CAN communication Diagnosis delay time 1 second or less POSSIBLE CAUSE TCM ADAS control unit FAIL-SAFEThe following systems are canceled: Automatic Emergency Braking (AEB) with pedestrian detection Automatic Emergency Braking (AEB) Intelligent Forward Collision Warning (I-FCW) Blind Spot Warning (BSW) Rear Cross Traffic Alert (RCTA) Lane Departure Warning (LDW) Intelligent Lane Intervention (I-LI) Confirmation Procedure CHECK DTC PRIORITY If DTC “C1A4A-82” is displayed with DTC “U1000–01”, first diagnose the DTC “U1000–01”...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Intelligent Forward Collision Warning (I-FCW)
- Settings
- Jacking up vehicle and removing the damaged tire
- New on site
- Most important about car
Vehicle security system
Your vehicle has two types of security systems:
Vehicle security system NISSAN Vehicle Immobilizer SystemThe vehicle security system provides visual and audible alarm signals if someone opens the doors, liftgate or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.
