Exploded View
1.
AV control unit bracket (RH)
2.
AV control unit
3.
AV control unit bracket (LH)
4.
A/C auto amp.
Removal and Installation
REMOVALCAUTION:
Before disconnecting the AV control unit and battery terminals, turn the ignition switch OFF and wait at least 30 seconds...
Other information:
Diagnosis Description
This system is an on board diagnostic system that records exhaust emission-related diagnostic information and detects a sensors/actuator-related malfunction. A malfunction is indicated by the malfunction indicator lamp (MIL) and stored in ECU memory as a DTC...
Diagnosis Procedure
CHECK METER CONTROL SWITCH SIGNAL
Ignition switch ON.
Check voltage between the following terminals of the meter control switch harness connector.
Meter control switch Condition
Voltage
(Approx.)
Connector Terminals
(+) (−)
M27
7
4
When illumination control switch (−) is pressed
0 V
Other than the above
5 V
5
When trip reset switch is pressed
0 V
Other than the above
5 V
6
When illumination control switch (+) is pressed
0 V
Other than the above
5 V
Is the inspection result normal?
YES>>
Inspection End...