Nissan Murano: Audio, Visual & Navigation System :: Telematics System / Dtc/circuit Diagnosis
- B130c Tcu Pairing Error
- B130d Tel Line Out Error
- B1310 Tcu Temperature Error
- B13d9 Usb Connection
- B2e33 Ecall Button
- B2ef0 Internal Battery
- U1000 Can Comm Circuit
- U1a03 Sim Card
- U1a04 Vin Unfinished
- U1a05 Usb Comm
- U1a06 Usb Comm
- U1a0b Mic in Conn
- U1a0e Sos Switch on Stuck
- U1a10 Airbag Signal
- Power Supply and Ground Circuit
Additional Service When Replacing Tcu
Description
NOTE:
You must have ALL customer keys before beginning this procedure.
Each TCU is registered to a specific VIN. TCU’s cannot be swapped between Nissan Murano vehicles...
B130c Tcu Pairing Error
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
B130C
TCU pairing error
(TCU pairing error)
Diagnosis condition
When ignition switch is ON...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Blower Motor
Removal and Installation REMOVALRemove the glove box assembly. Refer to Removal and Installation. Disconnect the harness connector (B) from the blower motor. Remove the blower motor screws (A) and the blower motor from the blower unit. NOTE: Do not disassemble the blower motor to replace individual components; replace as an assembly...
Nissan Murano (Z52) 2015-2024 Service Manual: Instrument Panel :: Preparation. Preparation
Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description — (J-39570) Chassis Ear Locating the noise — (J-50397) Squeak and Rattle Kit Repairing the cause of noise — (J-46534) Trim Tool Set Removing trim components Commercial Service Tools (TechMate No...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Warning lights
- Tire rotation
- Fuel recommendation
- New on site
- Most important about car
LATCH (Lower Anchors and Tethers for CHildren) system
LATCH system lower anchor locations - bench seat
Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
Copyright © 2026 www.nimurano.com