Nissan Murano: Driver Information & Multimedia / Audio, Visual & Navigation System :: Rear View Monitor System

Front Camera

Removal and Installation REMOVALRemove front grille. Refer to Removal and Installation. Disconnect the harness connector from the front camera. Remove screws (A) and remove front camera (1)...

Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Fuel Filler Lid Release Cable

Removal and Installation REMOVALRemove fuel filler lid/hood lock release handle bolts (A). Disconnect the fuel filler lid release cable (2) from the fuel filler lid release handle (1). Remove dash side finisher (LH). Refer to Removal and Installation...

Nissan Murano (Z52) 2015-2024 Service Manual: P2122 App Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the APP sensor 1 is sent to ECM. An excessively high voltage from the APP sensor 1 is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2122 APP SEN 1/CIRC (Throttle/Pedal position sensor/switch “D” circuit low) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from APP sensor 1 to ECM Threshold An excessively low voltage is sent to ECM Diagnosis delay time — P2123 APP SEN 1/CIRC (Throttle/Pedal position sensor/switch “D” circuit high) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from APP sensor 1 to ECM Threshold An excessively high voltage is sent to ECM Diagnosis delay time — POSSIBLE CAUSEDTC P2122 Harness or connectors (APP sensor 1 circuit is open or shorted...