Other information:
Component Function Check
CHECK FUNCTION
CONSULT
Select “REQ SW-DR” or “REQ SW-AS” in “Data Monitor” mode of “BCM(INTELLIGENT KEY)”.
Check that the function operates normally according to the following conditions:
Monitor Item Condition Status
REQ SW -DR
LH door request switch
Pressed
ON
Released
OFF
REQ SW -AS
RH door request switch
Pressed
ON
Released
OFF
Is the inspection result normal?
YES>>
Front door request switch is OK...
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC detection condition
C1B03-4B
CAM ABNRML TMP DETCT
(Camera abnormal temperature detect)
Diagnosis condition
When engine is running
When I-LI system is ON
Signal (terminal)
—
Threshold
Temperature around lane camera unit is excessively high
Diagnosis delay time
1 second or less
POSSIBLE CAUSE
Interior room temperature is excessively high
ADAS control unit
FAIL-SAFEThe following systems are canceled:
Lane Departure Warning (LDW)
Intelligent Lane Intervention (I-LI)
Blind Spot Warning (BSW)
Rear Cross Traffic Alert (RCTA)
Traffic Sign Recognition (TSR)
Confirmation Procedure
DTC CONFIRMATION PROCEDUREPERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Start the engine...