Other information:
Description
When the battery is disconnected from the negative terminal, it is necessary to perform initial setting to operate automatic back door control system normally.NOTE:
The following specified operations are not performed under the non-initialized condition:
Automatic back door open/close function
Anti-pinch function
Work Procedure
INITIALIZATION
Fully close the back door manually...
Inspection
Check the brake pedal height with the floor trim removed.
Check the brake pedal height (H) between the dash lower panel (2) and the brake pedal upper surface.
Brake pedal height (H) from dash lower panel (2)
Refer to Brake Pedal.
Clearance (A) between brake pedal bracket (1), stop lamp switch (3) and brake pedal position switch (4) contact ends
Refer to Brake Pedal...