Nissan Murano: Audio, Visual & Navigation System :: Intelligent Around View Monitor with Navigation System / Removal and Installation
Symptom Table
INTELLIGENT AROUND VIEW MONITOR SYSTEMNOTE:
Inspect the vehicle for a front license plate frame or cover. If there is a front license plate frame or cover, the front camera will see it and show it on the monitor...
Exploded View
1.
AV control unit bracket (RH)
2.
AV control unit
3.
AV control unit bracket (LH)
4.
A/C auto amp.
Removal and Installation
REMOVALCAUTION:
Before disconnecting the AV control unit and battery terminals, turn the ignition switch OFF and wait at least 30 seconds...
Other information:
Diagnosis Procedure
LHCHECK FUSE
Check if any of the following fuses are blown:
Signal name Fuse No. Capacity
Battery power supply
60
15 A
Ignition power supply
29
10 A
Are the fuses blown?
YES>>
Replace the blown fuse after repairing the affected circuit...
Work Flow
DETAILED FLOWINTERVIEW THE CUSTOMER
Clarify customer complaints before inspection. First of all, perform an interview utilizing Diagnostic Work Sheet and reproduce symptoms to understand them fully. Ask customer about his/her complaints carefully...
Categories

LATCH system lower anchor locations -
bench seat
Your vehicle is equipped with special anchor
points that are used with LATCH system
compatible child restraints. This system
may also be referred to as the ISOFIX
or ISOFIX compatible system. With this system,
you do not have to use a vehicle seat
belt to secure the child restraint unless the
combined weight of the child and child restraint
exceeds 65 lbs. (29.5 kg). If the combined
weight of the child and child restraint
is greater than 65 lbs. (29.5 kg), use the vehicle’s
seat belt (not the lower anchors) to
install the child restraint. Be sure to follow
the child restraint manufacturer’s instructions
for installation.
read more