Other information:
Work Procedure
CHECK FUSES
Check that the following fuse is not blown.
Signal name Fuse No.
Ignition power supply
29(10A)
Is the fuse blown?
YES>>
Replace the blown fuse after repairing the affected circuit.
NO>>
GO TO 2.
CHECK LANE CAMERA UNIT POWER SUPPLY CIRCUIT
Check voltage between lane camera unit harness connector and ground...
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen item
(Trouble diagnosis content) DTC detection condition
C1130
ENGINE SIGNAL 1
(Engine system signal)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
CAN communication signal
Threshold
When a malfunction is detected in ECM system...