Nissan Murano: Audio, Visual & Navigation System :: Navigation Without Bose / Dtc/circuit Diagnosis

Configuration (av Control Unit)

Description Vehicle specification needs to be written with CONSULT because it is not written after replacing AV control unit.Configuration has three functions as follows: Function Description "Before Replace ECU" Reads the Nissan Murano vehicle configuration of current AV control unit...

B1305 Control Unit Internal Fault

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B1305–04 Control unit internal error (AV control unit internal fault) [—] Diagnosis condition When ignition switch is ON...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: Automatic drive positioner (if so equipped)

The automatic drive positioner system has three features: Memory storage function (key-link) Memory storage function (switch) Entry/exit function Key-link, when enabled, automatically retains the driver’s last seat, automatic steering wheel, and outside mirror positions for that specific key when the ignition is turned from ON to OFF...

Nissan Murano (Z52) 2015-2024 Service Manual: Diagnosis System (adas Control Unit 2)

CONSULT Function (ICC/ADAS) APPLICATION ITEMSCONSULT performs the following functions via CAN communication using ADAS control unit. Diagnosis mode Description Configuration The Nissan Murano vehicle specification that is written in ADAS control unit can be displayed or stored The Nissan Murano vehicle specification can be written when ADAS control unit is replaced Work support Displays causes of automatic system cancellation occurred during system control Self Diagnostic Result Displays the name of a malfunctioning system stored in the ADAS control unit Data Monitor Displays ADAS control unit input/output data in real time Active Test Enables an operational check of a load by transmitting a driving signal from the ADAS control unit to the load ECU Identification Displays ADAS control unit part number CAN Diag Support Monitor Displays a reception/transmission state of CAN communication and ITS communication CONFIGURATIONConfiguration includes functions as follows...