Nissan Murano: Driver Information & Multimedia / Meter, Warning Lamp & Indicator :: System Description

Meter, Warning Lamp & Indicator :: Preparation. Preparation

Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name   Description   — (J-46534) Trim Tool Set Removing trim components Commercial Service Tools (TechMate No...

Component Parts. Meter System

Component Parts Location :Nissan Murano Vehicle front         A. View of the inspection hole covers with the second row seat removed B...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Tcs Function

System Description SYSTEM DIAGRAM Wheel spin status of drive wheel is detected by wheel sensor of 4 wheels. Engine output and transmission shift status are controlled so that slip rate of drive wheels is in appropriate level. When wheel spin occurs on drive wheel, ABS actuator and electric unit (control unit) performs brake force control of LH and RH drive wheels (applies brake force by increasing brake fluid pressure of drive wheel) and decreases engine torque by engine torque control...

Nissan Murano (Z52) 2015-2024 Service Manual: Door Does Not Lock/unlock and Engine Does Not Start (req Sw/push Sw) (one Key)

Diagnosis Procedure Door does not lock/unlock with door request switch, and engine does not start when ignition switch is pressed while carrying Intelligent Key. (One Intelligent Key has the symptom, other keys operate normally.)SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY) Door lock operation (remote keyless entry) Door lock operation (request switch) or back door open operation (opener switch of back door panel) Engine started with push-button ignition switch operation (Intelligent Key is within the detection area of inside key antenna) Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch) OK NG No crank, No start OK DIAGNOSIS PROCEDURERefer to Diagnosis Procedure...