Nissan Murano: Driver Controls

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls

Service Data and Specifications (sds). Body Alignment

Body Center Marks Factory marks exist on certain parts of the body to indicate the vehicle center. When repairing the Nissan Murano vehicle frame (members, pillars, etc...

Mirrors :: Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B1360 Combination Meter


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B1360–02 Combination meter (Combination meter connection error) Diagnosis condition When ignition switch is ON. Signal (terminal) — Threshold — Diagnosis delay time — POSSIBLE CAUSE AV communication circuit is open Combination meter FAIL-SAFESteering switch is inoperative DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Service Manual: Both Side Headlamps (hi) Are Not Turned on


Diagnosis Procedure Both side headlamps (HI) are not turned ON when setting to the lighting switch HI or PASS.COMBINATION SWITCH INSPECTION Check combination switch. Refer to Symptom Table. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace the malfunctioning part...

Categories

Front manual seat adjustment (if so equipped)

Your vehicle seats can be adjusted manually. For additional information about adjusting the seats, refer to the steps outlined in this section.

Forward and backward

Nissan Murano. Front manual seat adjustment (if so equipped)

read more

 
Copyright © 2026 www.nimurano.com