Nissan Murano: Interior Lighting System :: System Description / System

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Interior Lighting System :: System Description / System

Component Parts. Interior Room Lamp Control System

Component Parts Location No. Component Function 1. Meter control switch Transmits the meter control switch signal to the combination meter. Refer to Meter Control Switch for detailed component location...

Interior Room Lamp Control System

System Description SYSTEM DIAGRAMOPERATION DESCRIPTION Front room/map lamp assembly, personal lamps 2nd row and luggage room lamp are controlled by the interior room lamp timer control function of the BCM when the lamp switch is in the DOOR position...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Luggage Room Lamp


Component Function Check NOTE: Before performing the diagnosis, check that the following are normal: Battery saver output/power supply circuit Luggage room lamp bulb CHECK LUGGAGE ROOM LAMP OPERATION CONSULT Ignition switch ON. Select “TRUNK/LUGGAGE LAMP TEST” in “Active Test” mode of “BCM(INTELLIGENT KEY)”...

Nissan Murano (Z52) 2015-2024 Service Manual: B2423 Abd Mtr Time Out


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2423 ABD MTR TIME OUT (Automatic back door motor time out) Diagnosis condition When the automatic back door is operated approximately 5-6 times (open & close cycles) continuously (for 60–100 seconds in any direction) without any stoppages, the control module will momentarily inhibit operation to protect the system...

Categories

Luggage hooks

Nissan Murano. Luggage hooks

When securing items using luggage hooks located on the back of the seat or side finisher do not apply a load over more than 6.5 lbs. (29 N) to a single hook.

The luggage hooks that are located on the floor should have loads less than 110 lbs. (490 N) to a single hook.

read more

 
Copyright © 2026 www.nimurano.com