Nissan Murano: Mirrors :: Removal and Installation / Main Power Window and Door Mirror Switch

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Mirrors :: Removal and Installation / Main Power Window and Door Mirror Switch

Removal and Installation

REMOVAL

Remove main power window and door lock/unlock switch finisher. Refer to Removal and Installation.

Release pawls and remove door mirror remote control switch (1) from main power window and door lock/unlock switch finisher (2).

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

Side Camera Finisher

Removal and Installation The side camera finisher (if equipped) is serviced as part of the door mirror rear finisher. Refer to Removal and Installation...

Exterior Lighting System :: Led Headlamp

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: C1b52-17 Blind Spot Warning Indicator Open Circuit

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1B52-17 BSW/BSI IND OPEN CIR (Blind Spot Warning indicator open circuit) Diagnosis condition When ignition switch is ON. Signal (terminal) – Threshold Open circuit in Blind Spot Warning indicator circuit is detected Diagnosis delay time – POSSIBLE CAUSE Blind Spot Warning indicator LH circuit Blind Spot Warning indicator LH Side radar LH FAIL-SAFEThe following systems are canceled: Blind Spot Warning (BSW) Rear Cross Traffic Alert (RCTA) DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Start the engine...

Nissan Murano (Z52) 2015-2024 Service Manual: Hazard Switch Circuit

Component Function Check CHECK HAZARD SWITCH SIGNAL CONSULT Ignition switch ON. Select “HAZARD SW” in “Data Monitor” mode of “BCM(FLASHER)”. While operating the hazard switch, check the monitor status. Monitor item Condition Monitor status HAZARD SW Hazard switch ON On OFF Off Is the inspection result normal? YES>> Hazard switch circuit is normal...