Nissan Murano: Interior Lighting System :: Removal and Installation / Illumination Control Switch

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Interior Lighting System :: Removal and Installation / Illumination Control Switch

Removal and Installation

The illumination control switch is serviced as part of the meter control switch. Refer to Removal and Installation.

    Mood Lamp

    Removal and Installation FRONT CONSOLERemovalRemove center console upper side finisher. Refer to Exploded View. Remove mood lamp (front console) (1) screw (B)...

    Interior Lighting System :: Service Data and Specifications (sds). Service Data and Specifications (sds)

    Bulb Specifications Item Wattage (W)* Front room/map lamp assembly – Vanity lamp 2 Glove box lamp 1.4 Personal lamp 2nd row – Luggage room lamp 5 Mood lamp (front console) – Mood lamp (rear console) – Mood lamp (door armrest) – *: Always check with the Parts Department for the latest parts information...

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: Trailer frontal area


    CAUTION Exceeding the maximum trailer frontal area specification may exceed the towing capacity of the vehicle. This may affect the towing performance and lead to vehicle damage. The trailer frontal area affects the towing load of a trailer. The frontal area is the total area of the vehicle and trailer that is affected by air resistance while towing...

    Nissan Murano (Z52) 2015-2024 Service Manual: Distance Sensor (icc Sensor) Alignment


    Work Procedure Always perform the radar alignment after removing and installing or replacing the distance sensor.Application Notice Type Description TYPE 1 When using KV99112700 for radar alignment. Refer to Description. TYPE 2 When using 1-20-2851-1 for radar alignment...

    Categories

    Fuel gauge

    Nissan Murano. Fuel gauge

    The gauge indicates the approximate fuel level in the tank.

    The gauge may move slightly during braking, turning, acceleration, or going up or down hills.

    The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position.

    read more

     
    Copyright © 2026 www.nimurano.com