Nissan Murano: Defogger :: Symptom Diagnosis / Defogger System Symptoms

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Defogger :: Symptom Diagnosis / Defogger System Symptoms

Symptom Table

Symptom	Reference page
Rear window defogger and door mirror defoggers do not operate.	Refer to Diagnosis Procedure.
Rear window defogger does not operate but both of the door mirror defoggers operate.	Refer to Diagnosis Procedure.
Both door mirror defoggers don’t operate but rear window defogger operates.	Refer to Diagnosis Procedure.
Driver side door mirror defogger does not operate.	Refer to Diagnosis Procedure.
Passenger side door mirror defogger does not operate.	Refer to Diagnosis Procedure.
Rear window defogger switch does not light, but rear window defogger operates.	Refer to Diagnosis Procedure.

Defogger :: Symptom Diagnosis

Rear Window Defogger and Door Mirror Defoggers Do Not Operate

Diagnosis Procedure CHECK REAR WINDOW DEFOGGER SWITCH Check rear window defogger switch. Refer to Component Function Check. Is the inspection result normal? YES>> GO TO 2...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Automatic Back Door Warning Does Not Operate. Buzzer

Diagnosis Procedure Automatic back door warning buzzer does not operate when automatic back door warning function is performed.CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL MODULE Check that DTC is not detected with automatic back door control module. Is the inspection result normal? YES>> GO TO 2...

Nissan Murano (Z52) 2015-2024 Service Manual: Diagnosis System (combination Meter)

On Board Diagnosis Function COMBINATION METER SELF-DIAGNOSIS MODEThe following meter functions can be checked during Combination Meter Self-Diagnosis Mode: Pointer sweep of speedometer, tachometer and gauges Illumination of all LCD segments and color patterns for meter displays Illumination of all lamps/LEDs that are controlled by the combination meter (regardless of switch status) STARTING COMBINATION METER SELF-DIAGNOSIS MODENOTE: Check combination meter power supply and ground circuits if self-diagnosis mode does not start...