Nissan Murano: Exterior Lighting System :: Led Headlamp / Service Data and Specifications (sds). Service Data and Specifications (sds)

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Exterior Lighting System :: Led Headlamp / Service Data and Specifications (sds). Service Data and Specifications (sds)

Bulb Specifications

Item		Type	Wattage (W)
Front combination lamp	High beam	LED	—
	Low beam	LED	—
	Turn signal lamp	LED	—
	Side marker lamp	LED	—
	Daytime running lamp	LED	—
Front fog lamp		LED	—
Door mirror turn signal lamp		LED	—
Rear combination lamp (body side)	Stop lamp	LED	—
	Side marker lamp	LED	—
	Turn signal lamp	LED	—
Rear combination lamp (back door side)	Back-up lamp	LED	—
Rear combination lamp (back door side)	Tail lamp	LED	—
License plate lamp		W5W	5
High-mounted stop lamp		LED	—

*: Always check with the Parts Department for the latest parts info.

Rear Reflex Reflector

Exploded View 1. Rear reflex reflector Clip Removal and Installation REMOVALRemove rear bumper fascia. Refer to Removal and Installation. Remove rear reflex reflector fixing screw and pawls and then remove rear reflex reflector...

Interior Lighting System :: Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: C1b68 Pump Motor

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen item (Trouble diagnosis content) DTC detection condition C1B68 PUMP MOTOR (Pump motor) Diagnosis condition When ignition switch ON. When power supply voltage is normal. Signal (terminal) — Threshold When a malfunction is detected in pump motor...

Nissan Murano (Z52) 2015-2024 Service Manual: P2814 Select Solenoid

DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2814 SELECT SOLENOID (Select solenoid) Diagnosis condition TCM power supply voltage: 11 V or more Signal — Threshold TCM judges that solenoid valve circuit is shorted to ground Diagnosis delay time Maintained for 1 second POSSIBLE CAUSE Harness or connector (Select solenoid valve circuit shorted to ground) Select solenoid valve FAIL-SAFESelector shock is large DTC Confirmation Procedure CAUTION: Be careful of the driving speed...