Nissan Murano: Wiper & Washer :: Removal and Installation / Rear Washer Nozzle and Tube

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Wiper & Washer :: Removal and Installation / Rear Washer Nozzle and Tube

Washer Tube Layout

1. Rear washer tube 2. Grommet 3. Washer tank
4. Rear washer nozzle Clip  

Rear Wiper Motor

Exploded View 1. Seal 2. Rear wiper motor A. Refer to Installation. Removal and Installation REMOVALRemove the rear wiper arm. Refer to Removal and Installation...

Rear Washer Nozzle

Removal and Installation REMOVALRemove the rear spoiler. Refer to Removal and Installation. Disconect the rear washer tube from the rear washer nozzle...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Power Supply and Ground Circuit (lane Camera Unit)


Work Procedure CHECK FUSES Check that the following fuse is not blown. Signal name Fuse No. Ignition power supply 29(10A) Is the fuse blown? YES>> Replace the blown fuse after repairing the affected circuit. NO>> GO TO 2. CHECK LANE CAMERA UNIT POWER SUPPLY CIRCUIT Check voltage between lane camera unit harness connector and ground...

Nissan Murano (Z52) 2015-2024 Service Manual: B242e Hands Free Sensor 2


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B242E HANDS FREE SENOR 2 (Kick sensor 2) Diagnosis condition All times Signal (terminal) – Threshold BCM detects the abnormal resistance value of motion activated back door sensor (upper) via serial communication Diagnosis delay time – POSSIBLE CAUSE Motion activated back door sensor (upper) Harness or connectors [motion activated back door sensor (upper) circuit is open or shorted] BCM Motion activated back door control unit FAIL-SAFEInhibit motion activated automatic back door system DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Categories

read more

 
Copyright © 2026 www.nimurano.com