Nissan Murano: Wiper & Washer :: Removal and Installation / Wiper and Washer Switch

Front Wiper Motor

Exploded View 1. Front wiper drive 2. Front wiper motor Grease Removal and Installation REMOVALRemove the front drive assembly. Refer to Removal and Installation...

Rear Wiper Arm

Exploded View 1. Rear wiper arm cover 2. Seal 3. Rear wiper arm assembly 4. Rear wiper blade Removal and Installation REMOVALOperate the rear wiper arm into the auto stop position...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: Cleaning exterior

In order to maintain the appearance of your vehicle, it is important to take proper care of it. To protect the paint surfaces, wash your vehicle as soon as you can: After a rainfall to prevent possible damage from acid rain. After driving on coastal roads...

Nissan Murano (Z52) 2015-2024 Service Manual: P0706 Transmission Range Sensor a

DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0706 T/M RANGE SENSOR A (Transmission Range Sensor A Circuit Range/Performance) Diagnosis condition TCM power supply voltage: More than 11 V Signal Transmission range switch signal Threshold All range signals stay OFF Diagnosis delay time Maintained for 30 seconds POSSIBLE CAUSE Harness or connector (Open circuit between ignition switch and transmission range switch/open circuit between transmission range switch and TCM) Transmission range switch Control cable Harness or connector (CAN communication line is error)FAIL-SAFE Shift position indicator on combination meter is not displayed Selector shock is large Start is slow Acceleration is slow Lock-up is not performed DTC Confirmation Procedure PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test...