Nissan Murano: Wiper & Washer :: Removal and Installation / Front Wiper Motor

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Wiper & Washer :: Removal and Installation / Front Wiper Motor

Exploded View

1. Front wiper drive 2. Front wiper motor Grease
Removal and Installation

REMOVAL

Remove the front drive assembly. Refer to Removal and Installation.

Remove bolts and the front wiper motor.

INSTALLATION

Installation is in the reverse order of removal.

    Front Wiper Drive Assembly

    Exploded View 1. Front wiper drive assembly     Removal and Installation REMOVALRemove the cowl top cover. Refer to Removal and Installation — Cowl Top Cover...

    Wiper and Washer Switch

    Removal and Installation The wiper and washer switch are serviced as an assembly with the combination switch assembly. Refer to Removal and Installation...

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: LDW system operation


    Lane Departure Warning (LDW) indicator The LDWsystem provides a lane departure warning function when the vehicle is driven at speeds of approximately 37 mph (60 km/h) and above and the lane markings are clear. When the vehicle approaches either the left or the right side of the traveling lane, the steering wheel will vibrate and the LDW indicator on the instrument panel will blink to alert the driver...

    Nissan Murano (Z52) 2015-2024 Service Manual: P0139 Ho2s2


    DTC Description DTC DETECTION LOGICThe heated oxygen sensor 2 has a much longer switching time between rich and lean than the air fuel ratio (A/F) sensor 1. The oxygen storage capacity of the three way catalyst 1 causes the longer switching time. To judge the malfunctions of heated oxygen sensor 2, ECM monitors whether the switching response of the sensor's voltage is faster than specified during various driving conditions such as fuel cut...

    Categories

    Fuel gauge

    Nissan Murano. Fuel gauge

    The gauge indicates the approximate fuel level in the tank.

    The gauge may move slightly during braking, turning, acceleration, or going up or down hills.

    The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position.

    read more

     
    Copyright © 2026 www.nimurano.com