Nissan Murano: Driver Controls / Interior Lighting System :: Preparation. Preparation

Interior Lighting System :: Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Interior Lighting System :: System Description

..

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Diagnosis System (adas Control Unit 2)

CONSULT Function (ICC/ADAS) APPLICATION ITEMSCONSULT performs the following functions via CAN communication using ADAS control unit. Diagnosis mode Description Configuration The Nissan Murano vehicle specification that is written in ADAS control unit can be displayed or stored The Nissan Murano vehicle specification can be written when ADAS control unit is replaced Work support Displays causes of automatic system cancellation occurred during system control Self Diagnostic Result Displays the name of a malfunctioning system stored in the ADAS control unit Data Monitor Displays ADAS control unit input/output data in real time Active Test Enables an operational check of a load by transmitting a driving signal from the ADAS control unit to the load ECU Identification Displays ADAS control unit part number CAN Diag Support Monitor Displays a reception/transmission state of CAN communication and ITS communication CONFIGURATIONConfiguration includes functions as follows...

Nissan Murano (Z52) 2015-2024 Service Manual: Seat Belt Height Adjuster

Removal and Installation REMOVALRemove center pillar upper finisher. Refer to Removal and Installation. Remove seat belt height adjuster bolts (A) and seat belt height adjuster (1). INSTALLATIONInstallation is in the reverse order of removal.CAUTION: Make sure seat belt height adjuster is locked in lowest position and is aligned with the center pillar upper finisher opening during installation...