Nissan Murano: Driver Controls / Interior Lighting System :: System Description

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Interior Lighting System :: System Description

Interior Lighting System :: Preparation. Preparation

..

Component Parts. Interior Room Lamp Control System

Component Parts Location No. Component Function 1. Meter control switch Transmits the meter control switch signal to the combination meter. Refer to Meter Control Switch for detailed component location...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B1315 Am/fm 1 Antenna


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B1315–13 AM/FM 1 antenna (Radio antenna) [OPEN] Diagnosis condition When ignition switch is ON. Signal (terminal) ANT +B circuit between audio unit and antenna base (terminal 67) Threshold – Diagnosis delay time 30 seconds or more B1315–11 [GND–SHORT] Diagnosis condition When ignition switch is ON...

Nissan Murano (Z52) 2015-2024 Service Manual: Electric Controlled Coupling


Exploded View Stud bolt Connector bracket Reamer bolt Electric controlled coupling assembly Wave spring Drive pinion oil seal Drive pinion lock nut Pinion front bearing Gear carrier Collapsible spacer Drive pinion adjusting shim Pinion rear bearing Drive pinion Drive gear Differential case Side bearing Side bearing adjusting shim Side oil seal Rear cover Stud bolt Gasket Drain plug Filler plug Pinion mate thrust washer Pinion mate gear Side gear thrust washer Side gear Pinion mate shaft Lock pin     Oil seal lip Screw hole     : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb) : Always replace after every disassembly...

Categories

Autolight system

Nissan Murano. Autolight system

The autolight system allows the headlights to turn on and off automatically. The autolight system can:

Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.

read more

 
Copyright © 2026 www.nimurano.com