Other information:
DTC Description
DTC DETECTION LOGICThe comparison result of signals transmitted to ECM from each temperature sensor (IAT sensor, ECT sensor, FTT sensor, and EOT sensor) shows that the voltage signal of the ECT sensor is higher/lower than that of other temperature sensors when the engine is started with its cold state...
Component Function Check
CHECK REAR WIPER ON OPERATION
CONSULT
Select “RR WIPER” in “Active Test” mode of “BCM(WIPER)”.
While operating the test item, check rear wiper operation.
On
: Rear wiper ON operation
Off
: Stop the rear wiper...