Nissan Murano: Anti-Pinch Function Does Not Operate / Sunshade

Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Roof :: Symptom Diagnosis / Anti-Pinch Function Does Not Operate / Sunshade

Diagnosis Procedure

CHECK SUNSHADE MECHANISM

Check the following:

  • Operation malfunction caused by sunshade mechanism deformation, pinched harness or other foreign materials

    .
  • Operation malfunction and interference with other parts by poor installation

    .

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

PERFORM INITIALIZATION

Perform anti-pinch procedure.

Refer to Special Repair Requirement.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

GO TO 1.

RETEST THE ANTI-PINCH FUNCTION

Check anti-pinch operation. Refer to Special Repair Requirement.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace the sunshade motor assembly. Refer to Removal and Installation.

    Moonroof

    Diagnosis Procedure PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to Special Repair Requirement. Is the inspection result normal? YES>> GO TO 2...

    Retained Power Operation Does Not Operate Properly

    Diagnosis Procedure CHECK FRONT DOOR SWITCH Check (LH and RH) front door switches. Refer to Diagnosis Procedure. Is the inspection result normal? YES>> GO TO 2...

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: How to change the set distance to the vehicle ahead


    The distance to the vehicle ahead can be selected at any time depending on the traffic conditions. Each time the distance switch is pushed, the set distance will change to long, middle, short and back to long again, in that sequence. Distance Approximate distance at 60 mph (100 km/h) [ft (m)] Long 200 (60) Middle 150 (45) Short 90 (30) The distance to the vehicle ahead will change according to the vehicle speed...

    Nissan Murano (Z52) 2015-2024 Service Manual: C1734 Control Unit


    DTC Description NOTE: The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the TPMS sensor Read TPMS DTCs Register TPMS sensor IDs DTC DETECTION LOGIC DTC No...

    Categories

    Unfastening the seat belts. Checking seat belt operation

    Unfastening the seat belts

    Nissan Murano. Unfastening the seat belts. Checking seat belt operation

    To unfasten the seat belt, press the button on the buckle Nissan Murano. Unfastening the seat belts. Checking seat belt operation. The seat belt automatically retracts.

    read more

     
    Copyright © 2026 www.nimurano.com