Other information:
Open the rear liftgate.
Pull up on the handle to lift the carpeted
floorboard and attach the hook
as shown.
Open the storage compartment
by
pulling on the strap to locate the jack
and tools .
Remove the jack and tools from the
storage area...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition
C1601
BATTERY VOLT
(Battery voltage)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
Power steering control module supply voltage (terminals 1 and 5)
Threshold
Less than 8 V or more than 19 V
Diagnosis delay time
Less than 1 second
POSSIBLE CAUSE
Harness or connectors
Power steering control module
Fuse
Battery power supply circuit
Battery
FAIL-SAFEManual steering state
DTC Confirmation Procedure
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always place the ignition switch in the OFF position and wait at least 10 seconds before conducting the next test...