Nissan Murano: Driver Controls / Mirrors :: Dtc/circuit Diagnosis. Main Power Window and Door Mirror Switch

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Controls / Mirrors :: Dtc/circuit Diagnosis. Main Power Window and Door Mirror Switch

Component Inspection

NOTE:

If equipped with ADP, refer to Component Function Check (for select switch) or Component Function Check (for mirror switch).

CHECK MIRROR SWITCH & SELECT SWITCH

  1. Ignition switch OFF.

  2. Disconnect door mirror remote control switch connector.

  3. Check door mirror remote control switch.

    Door mirror remote control switch Condition Continuity
    Terminal Select switch Mirror switch
    Door mirror RH 15 11 RIGHT RIGHT Yes
    10 9
    15 9 LEFT
    10 11
    15 3 UP
    10 11
    15 11 DOWN
    10 3
    Door mirror LH 15 12 LEFT RIGHT
    10 1
    15 1 LEFT
    10 12
    15 4 UP
    10 12
    15 12 DOWN
    10 4

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace door mirror remote control switch. Refer to Removal and Installation.

    Mirrors :: Basic Inspection. Diagnosis and Repair Work Flow

    Work Flow OVERALL SEQUENCEDETAILED FLOWINTERVIEW CUSTOMER Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred...

    Mirrors :: Symptom Diagnosis

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: Wiper


    CONSULT Function (BCM - WIPER) ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description PUSH SW [On/Off] Indicates condition of push-button ignition switch. VEH SPEED 1 [km/h] Indicates Nissan Murano vehicle speed signal received from ABS on CAN communication line...

    Nissan Murano (Z52) 2015-2024 Service Manual: P0171 Fuel Injection System Function


    DTC Description DTC DETECTION LOGICWith the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from A/F sensor 1. The ECM calculates the necessary compensation to correct the offset between the actual and the theoretical ratios...

    Categories

    read more

     
    Copyright © 2026 www.nimurano.com