Nissan Murano: Instruments and controls

Supplemental air bag warning light

The supplemental air bag warning light, displaying in the instrument panel, monitors the circuits for the air bag systems, pretensioner(s) and all related wiring...

Instrument panel

Vent Headlight/fog light (if so equipped)/turn signal switch Supplemental air bagHorn Meters and gaugesWarning and indicator lights Vehicle information display Wiper and washer switchRear window wiper and washer switch Audio system/Center display controls Hazard warning flasher switch Center displayNavigation display (if so equipped) Front passenger supplemental air bag Glove box Passenger supplemental knee air bag Front passenger air bag status light Power outlet USB portsAUX jack Heater and air conditioning controls Shift lever Push-button ignition switch Cruise control switches (if so equipped)Intelligent Cruise Control (ICC) switches (if so equipped) Driver supplemental knee air bag Bluetooth® Hands-Free Phone System/Audio control switches Hood releaseFuel door release Fuse box Heated steering wheel switch (if so equipped)Dynamic driver assistance switch (if so equipped) Liftgate instrument panel switch (if so equipped) 24...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Spindle Unit

Removal and Installation REMOVALSupport back door using a suitable tool. WARNING: Bodily injury may occur if back door is not supported properly when removing back door spindle unit. Remove luggage side upper finisher. Refer to Removal and Installation...

Nissan Murano (Z52) 2015-2024 Service Manual: Led Headlamp Operation Inspection

Work Procedure CHECK START In the cool LED status (wait for more than 10 minutes after turning headlamp OFF), turn ON and turn OFF headlamp several times. Check that headlamp operates normally each time. In the cool LED status, turn headlamp ON, wait until headlamp enters the stable status (approximately 5 minutes after turning headlamp ON) and then check that headlamp operates normally without blinking or flickering...