Nissan Murano: Windows / Power Windows

Nissan Murano (Z52) 2015-2024 Owners Manual / Instruments and controls / Windows / Power Windows

WARNING

  • Make sure that all passengers have their hands, etc., inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows.
  • To help avoid risk of injury or death through unintended operation of the vehicle and/or its systems, including entrapment in windows or inadvertent door lock activation, do not leave children, people who require the assistance of others or pets unattended in your vehicle. Additionally, the temperature inside a closed vehicle on a warm day can quickly become high enough to cause a significant risk of injury or death to people and pets.

The power windows operate when the ignition switch is placed in the ON position or for a period of time after the ignition switch is placed in the OFF position. If the driver’s or passenger’s door is opened during this period of time, the power to the windows is canceled.

Nissan Murano. Power Windows

  1. Window lock button
  2. Power door lock switch
  3. Front passenger side automatic switch
  4. Right rear passenger side switch
  5. Left rear passenger side switch
  6. Driver’s side automatic switch

    Windows

    ..

    Driver’s side power window switch, Locking passengers’ windows

    Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. To open a window, push the switch to the detent and continue to hold down until the desired window position is reached...

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: System temporarily unavailable


    Condition A: The warning and assist functions of the I-LI system are not designed to work under the following conditions: When you operate the lane change signal and change the traveling lanes in the direction of the signal. (The I-LI system will be deactivated for approximately 2 seconds after the lane change signal is turned off...

    Nissan Murano (Z52) 2015-2024 Service Manual: B26ff Intelligent Tuner Comm Err


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition B26FF INTELLIGENT TUNER COMM ERR (Intelligent tuner communication error) Diagnosis condition When ignition switch is ON. Signal (terminal) BCM terminal 119 Threshold Inactive communication between BCM and remote keyless entry receiver Diagnosis delay time — POSSIBLE CAUSE Remote keyless entry receiver Harness or connector BCM FAIL-SAFE— DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

    Categories

    Front manual seat adjustment (if so equipped)

    Your vehicle seats can be adjusted manually. For additional information about adjusting the seats, refer to the steps outlined in this section.

    Forward and backward

    Nissan Murano. Front manual seat adjustment (if so equipped)

    read more

     
    Copyright © 2026 www.nimurano.com