Nissan Murano: Windows / Driver’s side power window switch, Locking passengers’ windows
Driver’s side power window switch
The driver’s side control panel is equipped
with switches to open or close all of the
windows.
To open a window, push the switch to the
detent and continue to hold down until the
desired window position is reached. To
close a window, pull the switch to the detent
and continue to hold up until the desired
window position is reached.
Locking passengers’ windows
When the window lock switch is pushed,
only the driver’s side window can be
opened or closed. Push it again to cancel
the window lock function.
WARNING
Make sure that all passengers have
their hands, etc., inside the vehicle
while it is in motion and before closing
the windows. Use the window lock
switch to prevent unexpected use of
the power windows...
Front passenger’s power window switch
The passenger’s window switch operates
only the corresponding passenger’s window.
To open the window partially, push the
switch down lightly until the desired window
position is reached...
Other information:
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen items
(Trouble diagnosis content) DTC detection condition
C1B85-4B
POWER SUPPLY CIR
(Power supply circuit)
Diagnosis condition
When engine is running
When Automatic Emergency Braking or LDW system is ON
Signal (terminal)
—
Threshold
Distance sensor judges high temperature abnormality
Diagnosis delay time
1 second or less
POSSIBLE CAUSE
Temperature around the distance sensor (ICC Sensor) becomes high
ADAS control unit
FAIL-SAFEThe following systems are canceled:
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Automatic Emergency Braking (AEB) with pedestrian detection
Automatic Emergency Braking (AEB)
Intelligent Forward Collision Warning (I-FCW)
Lane Departure Warning (LDW)
Intelligent Lane Intervention (I-LI)
Confirmation Procedure
DTC CONFIRMATION PROCEDUREPERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Turn the ignition switch OFF...
CONSULT Function (BCM - RETAINED PWR)
ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH...