Nissan Murano: Warning lights, indicator lights and audible reminders / Audible reminders
Brake pad wear warning
The disc brake pads have audible wear
warnings. When a disc brake pad requires
replacement, it makes a high pitched
scraping sound when the vehicle is in motion,
whether or not the brake pedal is depressed.
Have the brakes checked as soon
as possible if the warning sound is heard.
Key left reminder chime
A chime sounds if the driver’s door is
opened while the ignition switch is placed
in the ACC or OFF position with the Intelligent
Key left in the vehicle. Make sure the
ignition switch is placed in the LOCK position,
and take the Intelligent Key with you
when leaving the vehicle.
Light reminder chime
With the ignition switch placed in the OFF
position, a chime sounds when the driver’s
door is opened if the headlights or parking
lights are on.
Turn the headlight control switch off before
leaving the vehicle.
NISSAN Intelligent Key® door buzzer (if so equipped)
The Intelligent Key door buzzer sounds if
any one of the following improper operations
is found.
- The ignition switch is not returned to
the LOCK position when locking the
doors.
- The Intelligent Key is left inside the vehicle
when locking the doors.
- The Intelligent Key is taken outside the
vehicle when operating the vehicle.
- Any doors are not closed securely when
locking the doors.
When the buzzer sounds, be sure to check
both the vehicle and the Intelligent Key. For
additional information, refer to “NISSAN Intelligent
Key®” in the “Pre-driving checks
and adjustments” section of this manual.
NISSAN Intelligent Key® Lock-in Prevention
The Intelligent Key buzzer sounds if the Intelligent
Key is left inside the vehicle when
the doors are closed and locked. When the
buzzer sounds, be sure to take the Intelligent
Key with you when leaving the vehicle.
For additional information, refer to “NISSAN
Intelligent Key®” in the “Pre-driving checks
and adjustments” section of this manual.
For additional information, refer to “Vehicle
information display” in this section.
Front fog light indicator
light (if so equipped)
The front fog light indicator light illuminates
when the front fog lights are on...
The vehicle information display is located
to the left of the speedometer. It displays
such items as:
Home
Audio information
Navigation information (if so equipped)
Drive computer information
Fuel economy information
Driving aids information (if so equipped)
Speed Limit Sign (if so equipped)
Tire pressure information
Indicators and warnings
Vehicle and meter display settings
Cruise control status
Odometer/twin trip odometer
Gear position information (P, R, N, D)
Distance To Empty and fuel indicator
Time
Outside Air Temperature
The display will be interrupted when a
phone call is received...
Other information:
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P2101
ETC FNCTN/CIRC-B1
(Throttle actuator “A” control motor circuit range/performance)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
—
Threshold
Electric throttle control function does not operate properly
Diagnosis delay time
—
POSSIBLE CAUSE
Harness or connectors
(Throttle control motor circuit is open or shorted)
Electric throttle control actuator
FAIL-SAFE Engine operating condition in fail-safe mode
Fail safe mode Nissan Murano Vehicle behavior
Electric throttle control function
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx...
DTC Description
DTC DETECTION LOGICEVAP canister vent control valve remains closed under specified driving conditions. DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0448
VENT CONTROL VALVE
(Evaporative emission system vent control circuit shorted)
Diagnosis condition
—
Signal (terminal)
—
Threshold
EVAP canister vent control valve remains closed under specified driving conditions
Diagnosis delay time
—
POSSIBLE CAUSE
EVAP canister vent control valve
EVAP control system pressure sensor and the circuit
Blocked rubber tube to EVAP canister vent control valve
EVAP canister is saturated with water
FAIL-SAFENot applicable
DTC Confirmation Procedure
PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test...