Nissan Murano: Instruments and controls / Vehicle information display

The vehicle information display is located
to the left of the speedometer. It displays
such items as:
- Home
- Audio information
- Navigation information (if so equipped)
- Drive computer information
- Fuel economy information
- Driving aids information (if so equipped)
- Speed Limit Sign (if so equipped)
- Tire pressure information
- Indicators and warnings
- Vehicle and meter display settings
- Cruise control status
- Odometer/twin trip odometer
- Gear position information (P, R, N, D)
- Distance To Empty and fuel indicator
- Time
- Outside Air Temperature
The display will be interrupted when a
phone call is received. Phone calls can be
answered or rejected through the steering
wheel controls.
Brake pad wear warning
The disc brake pads have audible wear
warnings. When a disc brake pad requires
replacement, it makes a high pitched
scraping sound when the vehicle is in motion,
whether or not the brake pedal is depressed...
The vehicle information display can be
changed using the OK
and buttons located on
the steering wheel.
OK — change or select an item in the
vehicle information display...
Other information:
The lane camera unit for the LDW
system
is located above the inside mirror. To
keep the proper operation of the LDW system
and prevent a system malfunction, be
sure to observe the following:
Always keep the windshield clean.
Do not attach a sticker (including transparent
material) or install an accessory
near the camera unit...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition
C1A17–(44, 45, 46, 47, 48, 49)
CONTROL UNIT
Diagnosis condition
When Ignition switch is ON.
Signal (terminal)
—
Threshold
If distance sensor (ICC sensor) is malfunctioning
Diagnosis delay time
—
NOTE:
If any DTC “C1A17” is detected along with DTC “U1000”, first diagnose the DTC “U1000”...
Categories

Your vehicle has two types of security systems:
Vehicle security system
NISSAN Vehicle Immobilizer System
The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate or the hood when
the system is armed. It is not, however, a
motion detection type system that activates
when a vehicle is moved or when a
vibration occurs.
read more