Nissan Murano: Instruments and controls / Warning lights, indicator lights and audible reminders

Distance To Empty (DTE)

Displays the estimated distance the vehicle can be driven before refueling. The value is calculated based on recent fuel economy, the amount of fuel remaining in the fuel tank, and the actual fuel consumption...

Checking lights

With all doors closed, apply the parking brake, fasten the seat belts and place the ignition switch in the ON position without starting the engine. The following lights (if so equipped) will come on: , or , , , , The following lights (if so equipped) come on briefly and then go off: or , , , , If any light fails to come on or operate in a way other than described, it may indicate a burned-out bulb and/or a system malfunction...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Tcs Function

System Description SYSTEM DIAGRAM Wheel spin status of drive wheel is detected by wheel sensor of 4 wheels. Engine output and transmission shift status are controlled so that slip rate of drive wheels is in appropriate level. When wheel spin occurs on drive wheel, ABS actuator and electric unit (control unit) performs brake force control of LH and RH drive wheels (applies brake force by increasing brake fluid pressure of drive wheel) and decreases engine torque by engine torque control...

Nissan Murano (Z52) 2015-2024 Service Manual: Power Supply and Ground Circuit. Av Control Unit

Diagnosis Procedure CHECK FUSE Check that the following fuses are not blown: Terminal No. Signal name Fuse No. Capacity 7 ACC power supply 7 10 A 17 Ignition power supply 29 10 A 19 Battery power supply 15 20 A Are the fuses blown? YES>> Replace the blown fuse after repairing the affected circuit...