Nissan Murano: Storage / Storage trays

Seatback pockets

Theremaybe one or two seatback pockets located on the back of the driver and passenger seats. The pockets can be used to store maps. WARNING To ensure proper operation of the passenger’s NISSAN Advanced Air Bag System, please observe the following items: Do not allow a passenger in the rear seat to push or pull on the seatback pocket or headrest...

Glove box

Open the glove box by pulling the handle. Use the mechanical key to lock or unlock the glove box. The valet key (if so equipped) cannot be used to lock or unlock the glove box...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Door Sash Molding

Exploded View 1. Front door sash molding 2. Rear door rear sash molding 3. Front door panel 4. Rear door panel Removal and Installation FRONT DOORRemovalRemove door mirror. Refer to Removal and Installation. Remove front door sash molding clip (A) using a suitable tool (B)...

Nissan Murano (Z52) 2015-2024 Service Manual: B2738 Front Sensor Power

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B2738–11 FRONT SENSOR POWER (Front sensor power) — Diagnosis condition Ignition switch ON Signal (terminal) Front sensor power supply (terminal 11) Threshold Front sensor power supply is short to ground Diagnosis delay time 4 seconds or more B2738–12 Diagnosis condition Ignition switch ON Signal (terminal) Front sensor power supply (terminal 11) Threshold Front sensor power supply is short to voltage Diagnosis delay time 4 seconds or more B2738–87 Diagnosis condition Ignition switch ON Signal (terminal) Front sensor power supply (terminal 11) Threshold Connection error is detected between sonar control unit and Front sonar sensors Diagnosis delay time 4 seconds or more POSSIBLE CAUSE Harness or connectors Sonar control unit FAIL-SAFEObstacle detection function is deactivated DTC Confirmation Procedure DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...