Nissan Murano: Security systems / NISSAN Vehicle Immobilizer System
The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of a registered key.
Never leave these keys in the vehicle.
FCC Notice:
For USA:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For Canada:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
Security indicator light
The security indicator light blinks whenever the ignition switch is placed in the OFF, LOCK or ACC position.
This function indicates the NISSAN Vehicle Immobilizer System is operational.
If the NISSAN Vehicle Immobilizer System is malfunctioning, the light will remain on while the ignition switch is placed in the ON position.
If the light still remains on and/or the engine will not start, seek service for the NISSAN Vehicle Immobilizer System as soon as possible. Please bring all registered keys that you have. It is recommended that you visit a NISSAN dealer for this service.
How to stop an activated alarm
The alarm stops only by unlocking the driver’s
door or the liftgate with the key (if so
equipped), pressing the button on
the Intelligent Key, or pushing the request
switch on the driver’s or passenger’s door
with the Intelligent Key in range of the door
handle...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: P0011 Ivt Control
DTC Description DTC DETECTION LOGICThere is a gap between angle of target and phase-control angle degree. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0011 INT/V TIM CONT-B1 (“A” Camshaft Position - Timing Over-Advanced or System Performance bank 1) Diagnosis condition — Signal (terminal) Camshaft position sensor signal Threshold During the advanced control of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more...
Nissan Murano (Z52) 2015-2024 Owners Manual: Adjust
For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- High Beam Assist (if so equipped)
- Intelligent Forward Collision Warning (I-FCW)
- Jacking up vehicle and removing the damaged tire
- New on site
- Most important about car
Vehicle security system
Your vehicle has two types of security systems:
Vehicle security system NISSAN Vehicle Immobilizer SystemThe vehicle security system provides visual and audible alarm signals if someone opens the doors, liftgate or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.
