Nissan Murano: Security systems / Vehicle security system
Your vehicle has two types of security systems:
- Vehicle security system
- NISSAN Vehicle Immobilizer System
The vehicle security system provides visual and audible alarm signals if someone opens the doors, liftgate or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.
The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Always secure your vehicle even if parking for a brief period. Never leave your Intelligent Key in the vehicle, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible.
Many devices offering additional protection, such as component locks, identification markers, and tracking systems, are available at auto supply stores and specialty shops.A NISSANdealermayalso offer such equipment. Check with your insurance company to see if you may be eligible for discounts for various theft protection features.
- How to arm the vehicle security system
- Vehicle security system activation
- How to stop an activated alarm
How to arm the vehicle security system
Close all windows and the moonroof (if
so equipped). The system can be
armed even if the windows and
moonroof are open.
Remove the Intelligent Key fromthe vehicle...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Motion Activated Back Door Control Unit
Reference Value TERMINAL LAYOUTPHYSICAL VALUES Terminal No. (Wire color) Description Condition Voltage (Approx.) (+) (–) Signal name Input/Output 1 (L) Ground Serial communication Input/Output — — 2 (V) Ground Power supply (BAT) Input — Battery voltage 3 (B) Ground Ground — — 0 V 4 (W) Ground Motion activated back door sensor (upper) input signal Input — — 5 (W) Ground Motion activated back door sensor (upper) output signal Input — — 6 (W) Ground Motion activated back door sensor (lower) input signal Input — — 7 (W) Ground Motion activated back door sensor (lower) output signal Input — — NOTE: Voltage generated in communication circuit between motion activated back door sensor and motion activated back door control unit is extremely low and therefore cannot be measured...
Nissan Murano (Z52) 2015-2024 Service Manual: Buzzer
CONSULT Function (BCM - BUZZER) ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description PUSH SW [On/Off] Indicates condition of push-button ignition switch. UNLK SEN -DR [On/Off] Indicates condition of door unlock sensor...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Tire rotation
- Rear bench seat adjustment
- All-Wheel Drive (AWD) (if so equipped)
- New on site
- Most important about car
Luggage hooks
When securing items using luggage hooks located on the back of the seat or side finisher do not apply a load over more than 6.5 lbs. (29 N) to a single hook.
The luggage hooks that are located on the floor should have loads less than 110 lbs. (490 N) to a single hook.
