Nissan Murano: Instruments and controls / E-call (SOS) button (if so equipped)
The E-call (SOS) button is used in combination with a NissanConnect® Services subscription to call for assistance in case of an emergency.
Pressing the button will (with a paid subscription) reach a response specialist that will provide assistance based on the situation described by the vehicle’s occupant. For additional information, or to enroll your vehicle, refer to www.NissanUSA.com/connect, www.Nissan.ca/NissanConnect, or www.Nissan.ca/NissanConnect/fr or call 855–426–6628.
Vehicle Dynamic Control (VDC) OFF switch
The vehicle should be driven with the VDC
system on for most driving conditions.
If the vehicle is stuck in mud or snow, the
VDC system reduces the engine output to
reduce wheel spin...
Rear Door Alert
The Rear Door Alert system functions under
certain conditions to indicate there
may be an object or passenger in the rear
seat(s). Check the seat(s) before exiting the
vehicle...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Brake Master Cylinder
Exploded View 1. Sub tank cap 2. Sub tank 3. Sub tank bracket 4. Clamp 5. Hose 6. Clamp 7. Reservoir tank 8. Grommet 9. Cylinder body 10. Pin 11. O-ring Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease...
Nissan Murano (Z52) 2015-2024 Service Manual: Diagnosis System (adas Control Unit 2)
CONSULT Function (ICC/ADAS) APPLICATION ITEMSCONSULT performs the following functions via CAN communication using ADAS control unit. Diagnosis mode Description Configuration The Nissan Murano vehicle specification that is written in ADAS control unit can be displayed or stored The Nissan Murano vehicle specification can be written when ADAS control unit is replaced Work support Displays causes of automatic system cancellation occurred during system control Self Diagnostic Result Displays the name of a malfunctioning system stored in the ADAS control unit Data Monitor Displays ADAS control unit input/output data in real time Active Test Enables an operational check of a load by transmitting a driving signal from the ADAS control unit to the load ECU Identification Displays ADAS control unit part number CAN Diag Support Monitor Displays a reception/transmission state of CAN communication and ITS communication CONFIGURATIONConfiguration includes functions as follows...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Passenger compartment
- Indicator lights
- High Beam Assist (if so equipped)
- New on site
- Most important about car
LATCH (Lower Anchors and Tethers for CHildren) system
LATCH system lower anchor locations - bench seat
Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
