Nissan Murano: Instruments and controls / Power moonroof (if so equipped)

Nissan Murano (Z52) 2015-2024 Owners Manual / Instruments and controls / Power moonroof (if so equipped)

Automatic operation

To fully open a window, push the window switch down to the second detent and release it; it need not be held. The window automatically opens all the way...

Auto-reverse function

The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window occurs...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Moonroof Motor Assembly


Description BCM supplies the moonroof motor assembly with power. CPU is integrated in moonroof motor assembly. Tilts up/down & slides open/close by moonroof switch operation. In order to close the moonroof during high speed driving, the Combination meter will send a speed signal to the moonroof CPU to adjust the torque of the motor during the tilt-down operation...

Nissan Murano (Z52) 2015-2024 Service Manual: Center Pillar Upper Finisher


Removal and Installation REMOVALRemove center pillar lower finisher. Refer to Removal and Installation. Release pawls, using a suitable tool (A) and remove seat belt height adjuster bolt cover (LH). : Pawl Remove seat belt d-ring anchor bolt. Release center pillar upper finisher (1) pawl and clips using a suitable tool...

Categories

LATCH (Lower Anchors and Tethers for CHildren) system

Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

LATCH system lower anchor locations - bench seat

Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.

read more

 
Copyright © 2026 www.nimurano.com