Nissan Murano: Pre-driving checks and adjustments

Nissan Murano (Z52) 2015-2024 Owners Manual / Pre-driving checks and adjustments

If your vehicle is stolen.

If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink®. Consult the Owner’s Manual of each device or call the manufacturer or dealer of those devices for additional information...

Keys

..

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B2ef0 Internal Battery


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B2EF0 INTERNAL BATTERY (Internal battery) CIRC VOLT BELOW THRESHOLD Diagnosis condition When ignition switch is ON. Signal (terminal) — Threshold TCU internal malfunction Diagnosis delay time Less than 1 second INTERNAL ELECTRONIC ERROR Diagnosis condition When ignition switch is ON...

Nissan Murano (Z52) 2015-2024 Service Manual: Telescopic Sensor


Component Function Check DATA MONITOR CONSULT Select “TELESCO PULSE” in “Data Monitor” mode of “AUTO DRIVE POS.”. Check that the function operates normally according to the following conditions: Monitor item Condition Value TELESCO PULSE Steering column Operate (forward) Change (decrease) Operate (backward) Change (increase) Release No change Is the inspection result normal? YES>> Inspection End...

Categories

Front manual seat adjustment (if so equipped)

Your vehicle seats can be adjusted manually. For additional information about adjusting the seats, refer to the steps outlined in this section.

Forward and backward

Nissan Murano. Front manual seat adjustment (if so equipped)

read more

 
Copyright © 2026 www.nimurano.com