Nissan Murano: Doors / Automatic door locks
All doors lock automatically when the
vehicle speed reaches 15 mph
(24 km/h).
All doors unlock automaticallywhenthe
transmission is placed in the P (Park)
position or when the ignition switch is
placed in the OFF position.
NOTE:
The automatic door unlock function can
be changed using “Vehicle Settings” of
the vehicle information display. For additional
information, refer to “Vehicle information
display” in the “Instruments
and controls” section of this manual.
To lock all the doors without a key, push the
door lock switch (driver’s or front passenger’s
side) to the lock position . When
locking the door this way, be certain not to
leave the key inside the vehicle...
Child safety locks help prevent the rear
doors from being opened accidentally, especially
when small children are in the vehicle.
The child safety lock levers are located on
the edge of the rear doors...
Other information:
WARNING
Do not depress the accelerator pedal
while shifting from P (Park) or N (Neutral)
to R (Reverse), D (Drive), or M
(Manual shift mode). Always depress
the brake pedal until shifting is completed.
Failure to do so could cause
you to lose control and have an
accident...
DTC Description
DESCRIPTIONECM receives vehicle speed signals from two different paths via CAN communication line: One is from the ABS actuator and electric unit (control unit) via the combination unit and the other is from TCM.DTC DETECTION LOGICAt 20 km/h (13 MPH), ECM detects the following status continuously for 5 seconds or more: The difference between a Nissan Murano vehicle speed calculated by a output speed sensor transmitted from TCM to ECM via CAN communication and the Nissan Murano vehicle speed indicated on the combination meter exceeds 15km/h (10 MPH)...