The automatic drive positioner system will
not work or will stop operating under the
following conditions:
Other information:
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen item
(Trouble diagnosis content) DTC detected condition
C1101
RR RH SENSOR-1
(Rear RH wheel sensor-1)
Diagnosis condition
When ignition switch ON.
When rear wheel sensor RH power supply voltage is normal...
DTC Description
DTC DETECTION LOGICAn EOP sensor signal voltage applied to ECM remains lower than the specified value continuously for 10 seconds or more when the engine speed is 1,000 rpm or more. DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0524
ENGINE OIL PRESSURE
(Engine oil pressure too low)
Diagnosis condition
—
Signal (terminal)
Voltage signal transmitted from EOP sensor signal to ECM
Threshold
An EOP sensor signal voltage applied to ECM remains lower than the specified value continuously when the engine speed is 1,000 rpm or more
Diagnosis delay time
10 seconds or more
POSSIBLE CAUSE
Decrease in engine oil pressure
Decrease in engine oil level
Engine oil condition
EOP sensor
Cause of engine oil consumption
FAIL-SAFE Engine operating condition in fail-safe mode
Fail safe mode Nissan Murano Vehicle behavior
Engine oil pressure
ECM illuminates oil pressure warning lamp on the combination meter...