Nissan Murano: Pre-driving checks and adjustments / Automatic drive positioner (if so equipped)
The automatic drive positioner system has
three features:
- Memory storage function (key-link)
- Memory storage function (switch)
- Entry/exit function
Key-link, when enabled, automatically retains
the driver’s last seat, automatic steering
wheel, and outside mirror positions for
that specific key when the ignition is turned
from ON to OFF.
Each memory switch button (1 or 2) on the
driver’s door can also store one additional
position which is independent of the keylinked
position.
WARNING
Do not adjust the mirrors while driving.
You could lose control of your vehicle
and cause an accident.
Objects viewed in the outside mirror
on the passenger side are closer than
they appear...
Use the following process to setup key-link:
Unlock the vehicle with the desired Intelligent
Key while the ignition is OFF.
Place the ignition in the ON position...
Other information:
Description
Always perform when the battery terminal is disconnected or the driver seat control unit is replaced. Linking key fob to the meter display will not operate normally if no memory storage is performed.
Work Procedure
Intelligent Key Interlock Storage ProcedurePerforming the following operation associates the registered driving position with Intelligent Key...
Abbreviations: I = Inspect and correct or replace as necessary, R =
Replace
NOTE:
(1) After 40,000 miles (64,000 km) or 48 months, inspect every 10,000
miles (16,000 km) or 12 months. Replace the drive belt if
found damaged.
(2) If operating mainly in dusty conditions, more frequent maintenance
may be required...