Nissan Murano: Remote Engine Start (if so equipped) / Remote Engine Start operating range

Nissan Murano (Z52) 2015-2024 Owners Manual / Pre-driving checks and adjustments / Remote Engine Start (if so equipped) / Remote Engine Start operating range

WARNING

To help avoid risk of injury or death through unintended operation of the vehicle and/or its systems, including entrapment in windows or inadvertent door lock activation, do not leave children, peoplewhorequire the assistance of others or pets unattended in your vehicle. Additionally, the temperature inside a closed vehicle on awarm day can quickly become high enough to cause a significant risk of injury or death to people and pets.

CAUTION

When the Intelligent Key battery is discharged or other strong radio wave sources are present near the operating location, the Intelligent Key operating range becomes narrower, and the Intelligent Key may not function properly.

The Remote Engine Start function can only be used when the Intelligent Key is within the specified operating range from the vehicle.

The Remote Engine Start operating range is approximately 197 ft (60 m) from the vehicle.

Remote Engine Start (if so equipped)

Type A (if so equipped) The button will be on the NISSAN Intelligent Key® if the vehicle has Remote Engine Start. This feature allows the engine to start from outside the vehicle...

Remote starting the vehicle

To use the Remote Engine Start feature perform the following: Aim the Intelligent Key at the vehicle. Press the button to lock all doors. Within 5 seconds press and hold the button until the turn signal lights flash and the tail lamps turn on...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Drive Pinion

Exploded View Oil seal Transfer cover Filler plug Gasket Drain plug Oil seal O-ring Ring gear bearing adjusting shim (transfer cover side) Ring gear bearing (transfer cover side) Drive shaft oil seal Ring gear shaft Ring gear bearing (transfer case side) Ring gear bearing adjusting shim (transfer case side) Ring gear Baffle plate Transfer case Plug O-ring Oil seal Dowel pin Drive pinion Drive pinion adjusting shim O-ring Pinion bearing assembly Oil seal Dust cover Companion flange Pinion lock nut Oil seal lip Comply with the assembly procedure when tightening...

Nissan Murano (Z52) 2015-2024 Service Manual: C1609 Can Vhcl Speed

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1609 CAN VHCL SPEED (CAN Nissan Murano vehicle speed signal) Diagnosis condition When engine is ON Signal (terminal) Nissan Murano Vehicle speed signal Threshold ABS actuator and electric unit (control unit) input signal error is detected...