Nissan Murano: Pre-driving checks and adjustments / Steering wheel

Nissan Murano (Z52) 2015-2024 Owners Manual / Pre-driving checks and adjustments / Steering wheel

WARNING

Donot adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident.
Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort. The driver’s air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways or out of position in any way, you are at greater risk of injury or death in a crash. You may also receive serious or fatal injuries from the air bag if you are up against it when it inflates. Always sit back against the seatback and as far away as practical from the steering wheel. Always use the seat belts.

Loose Fuel Cap warning message

The Loose Fuel Cap warning message appears in the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled...

Manual operation (if so equipped)

Tilt and telescopic operation Pull the lock lever down: Adjust the steering wheel up or down in direction to the desired position. Adjust the steering wheel forward or backward in direction to the desired position...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Meter, Warning Lamp & Indicator :: Unit Disassembly and Assembly. Combination Meter

Exploded View 1. Combination meter 2. Front cover Pawl Disassembly and Assembly CAUTION: Do not touch the inside of front cover, pointer, the display and the printed area of the dial during the work. Keep away from magnetic sources. Do not damage the combination meter lens...

Nissan Murano (Z52) 2015-2024 Service Manual: U1302 Camera Power Volt

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U1302 CAMERA POWER VOLT (Camera power voltage) Diagnosis condition When ignition switch is ON Signal (terminal) Camera power supply circuits Threshold Camera power supply voltage is 5...